欧美18vivode,性色AV无码专区一ⅤA亚洲,卡一卡二卡三精品免费,四虎成人精品无码

?
Welcome to Sofu lubrication technology (Jiangsu) Co., Ltd
Contact us
hotline
0510-8378 5699
Address : No.1, Wankun Road, Xibei Town, Xishan DIstrict, Wuxi City, Jiangsu
location:Products >  english > 
Quench oil
time:2018-05-04
1.     Concept of Quench oil

Heat treatment is a process in which the metal material is kept in a solid state, heated to a specified temperature, and after a period of heat preservation, the process of cooling and reheating the metal within a specified time; a metal thermal processing technology is obtained by heat treatment to obtain the expected structure and properties of metal.
 

Quenching oil is a cooling medium needed for heat treatment of metallic materials, and it is a kind of processing oil.
 
2.     Characteristics of quench oil
 

Good cooling performance

Cooling performance is an important performance of quenching oil, its quality directly affects the quality of quenching parts. Good cooling performance can ensure that the parts after quenching have certain hardness and qualified metallographic structure, which can prevent parts from deforming and cracking.

High flash point and ignition point

When quenching, the temperature of oil will increase instantaneously. If the flash point and ignition point of oil are low, it may cause fire. Therefore, quenching oil should have high flash point and ignition point. Usually, the flash point should be 60-80℃higher than the use of oil temperature.
 

Good thermal oxidation stability

The quenching oil is used in the harsh conditions of high temperature and continuous operation for a long time. It requires oil products to have good anti-oxidation, thermal decomposition and anti aging properties, so as to ensure the cooling performance and service life of the oil.
 

Low viscosity

The viscosity of oil is related to its adhesion, carrying loss and cooling performance. Under the premise of ensuring the cooling performance and flash point of the oil, the viscosity of the oil should be as small as possible, so that it can not only reduce the carrying loss, but also facilitate the cleaning of the work piece.

Low content of water

Excessive moisture in oil products will affect the quality of heat treatment of parts, causing soft spots, quenching or cracking of parts, or oil spattering and accidents. The general provisions require that quenching oil in water content shall be not more than 0.05%.
 

Other characteristics

Besides the above characteristics, quenching oil should also be non-toxic, tasteless, easy to handle, pollute the environment, and make the surface of the hardened work piece bright.

Cutting fluidROLLING OIL

Copyright © 2018 Sofu lubrication technology (Jiangsu) Co., Ltd All Rights Reservrd
Sales department: :Mr Zhu 18114866558  Tel:0510-8378 5699  Fax:0510-5378 5689  Website:028diaoyu.com  
Address:No.1, Wankun Road, Xibei Town, Xishan DIstrict, Wuxi City, Jiangsu     
广宁县| 东兴市| 汾阳市| 鱼台县| 新民市| 稷山县| 永仁县| 日照市| 济阳县| 樟树市|